Filter
Top Products
40
English
Video Setup Page (underlined options are the factory default settings)
DVD Setup Menu Options (continued)
HDMI Setup It provides the picture settings to enhance the appearance and
picture quality for disc playback. This feature is only applicable
if you have connected this DVD system to a HDMI-compatible
TV/device.
{ HDMI Video }– Selects a suitable video resolution
depending on the capability of the
connected TV/device to further enhance
the HDMI video output.
{ 480p }
Progressive output in 480 lines for NTSC TV.
{ 576p }
Progressive output in 576 lines for PAL TV.
{ 720p } - (if a HDMI TV is connected)
Progressive output upscale to 720 lines.
{ 1080i } - (if a HDMI TV is connected)
Interlaced output upscale to 1080 lines.
{ Auto }
The video output will automatically follow the
display’s supported resolution.
Note: If no display appears on the TV due to unsupported resolution,
use the composite video cable to connect the DVD system and your
TV. Turn on your TV to the correct input channel for the composite
video and adjust the resolution setting to 480p/576p.
{ Wide Screen Format } – Selects a suitable screen display.
This feature is only available if you have
selected { TV Display - 16:9 Wide
Screen }.
{ Superwide }
Selects this to display the 4:3 picture disc on the
wide-screen TV with non-linear stretching
(center position of the screen is stretched less
than the side).
{ 4:3 Pillar Box }
Selects this to display 4:3 picture disc on the
wide-screen TV without stretching. Black bars
will be shown on the both sides of the TV
screen.
{ Off }
No aspect ratio adjustment is made when this
option is selected.
Note: The { Wide Screen Format } feature will be disabled if your
HDMI TV has been preset to { 480p } or { 576p } settings.