Philips HTS3455 Home Theater System User Manual


 
12
English
Remote Control (continued)
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D Point the remote control directly at the
remote sensor (iR) on the front panel.
E Select the source you wish to control by
pressing the DISC, TUNER, TV or
AUX/DI button on the remote control.
F Then select the desired function (for
example ., >).
CAUTION!
Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Batteries contain chemical
substances, so they should be
disposed of properly.