Filter
Top Products
48
DivX subtitle does not display correctly.
Ensure that the subtitle À le name is the •
same as the movie À le name.
Select the correct character set: •
1) Press
SETUP .
2) Select [Preferences] , then press
.
3) Select [DivX Subtitle] , then press OK .
4) Select the character set that supports
the subtitle.
The contents of the USB Á ash drive cannot
be read.
The USB Á ash drive format is not •
compatible with this Home Theater
System.
Drive is formatted with different À le •
system which is not supported by this
unit (e.g. NTFS).
Maximum size of memory supported is •
160GB.
No sound from the rear speakers and the
indicator on the wireless receiver blinks
continuously for more than one minute.
(For HTS3377W only)
Ensure that all required connections are •
done and do the following steps:
1) Press
.
2) Press
INFO , a screen is displayed.
3) Press 1, then press SURR button
within 5 seconds. ‘PAIRING SUCCESS’ is
displayed.
4) If ‘PAIRING FAIL’ is displayed, repeat
step 1 to 3.
No sound from TV program.
Connect an audio cable from the AUDIO •
input on this Home Theater System to
the AUDIO output on your TV. Then
press AUDIO SOURCE repeatedly to
select the corresponding audio input
source.
No surround sound effect from the speakers.
Press •SURR to select a correct surround
sound setting.
Ensure that the source you are playing •
is recorded or broadcast in surround
sound (Dolby Digital, etc).Sound cannot
transmit through HDMI connection if
the connected device is non-HDCP
compliant or only DVI-compatible. Make
an analog or digital audio connection.
Play
DivX video À les cannot be played.
Ensure that the DivX À le is encoded •
according to the ‘Home Theater ProÀ le’
with the DivX encoder.
Ensure that the DivX video À le is •
complete.
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is À xed on the disc.•
EN
1_hts3270-3377-3377W_12_en3.indd 48 2009-03-30 11:45:35 AM