Philips HTS3371D Stereo System User Manual


 
38
[Disc Lock]
Sets play restriction for a speciÀ c discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
[Lock] – Restricts access to the current
disc. Once activated, a password is
needed to unlock and play the disc.
[Unlock] – Plays all discs.
Tip
You can set or change the password (see ‘Adjust
settings’ > ‘Preferences’ > [Password] ).
[Display Dim]
Changes the brightness level of the display
panel on this Home Theater System.
[100%] – Normal brightness.
[70%] – Medium brightness.
[40%] – Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
[On] – Sets the screen saver to appear
after 5 minutes of inactivity (for example,
in pause or stop mode).
[Off] – Disable screen saver mode.
[Sleep Timer]
Switches to standby automatically after the
preset time.
[15 mins] , [30 mins] , [45 mins] , [60 mins]
– Selects the count down time before
the Home Theater System switches to
standby.
[Off] – Disables sleep timer mode.
[EasyLink Setup]
If this Home Theater System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select
[Off] .
[One Touch
Play]
When you press PLAY , the
TV and Home Theater System
are turned on. Disc play starts
if there is a disc in the Home
Theater System.
To disable this feature, select
[Off] .
[One Touch
Standby]
When you press and hold
STANDBY for at least three
seconds , connected HDMI
CEC devices simultaneously
switch to standby.
To disable this feature, select
[Off] .
[System
Audio
Control]
When you play audio that is
routed from the connected
devices, this Home Theater
System switches to the
corresponding audio source
automatically.
To enable this feature, select
[On] . Then proceed to [Audio
Input Mapping] to scan and
map all the connected devices.
[Audio Input
Mapping]
When you map the audio
input correctly, this Home
Theater System switches to
the audio from the played
device automatically.
Note
You must turn on the HDMI CEC operations on
the TV/devices before you can enjoy the EasyLink
controls. See the TV/devices manual for details.
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
EN
1_hts3371D-72D_F7_en 3.indd 38 4/30/2009 8:38:36 PM