Philips HTS3371D Stereo System User Manual


 
13
Option 4: Connect to the RF
modulator
If your TV only has a single Antenna Input
jack (labeled as 75 ohm or RF In), use a RF
modulator to view the disc play on the TV.
1 Connect a composite video cable
(yellow) from the VIDEO jack on this
Home Theater System to the video input
jack on RF modulator.
2 Connect a RF coaxial cable (not supplied)
from the ANTENNA OUT or
TO TV jack on the RF modulator to the
ANTENNA IN jack on your TV.
3 If the off-air antenna or Cable TV service
signal is connected to your TV, disconnect
it from your TV and connect it to the
ANTENNA IN or RF IN jack on the RF
modulator.
Tip
See your electronics retailer or contact Philips
for details about RF modulator availability and
operations.
VIDEO
Option 3: Connect to the Video
(CVBS) jack
1 Connect a composite video cable to
the VIDEO jack on this Home Theater
System and the VIDEO input jack on the
TV.
Note
The video input jack on the TV might be labeled as
A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture
quality.
VIDEO
VIDEO OUT
VIDEO IN
EN
Connect
English
1_hts3371D-72D_F7_en 3.indd 13 4/30/2009 8:38:34 PM