Philips HTS3371D Stereo System User Manual


 
19
Select menu display language
Note
Skip this setting if this Home Theater System is
connected to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language as
per your TV setting.
1 Press DISC .
2 Press SETUP .
» [General Setup] menu is displayed.
3 Press .
4 Press to select [OSD Language] in
the menu, then press
.
The language options are different
depending on your country or
region. It may not correspond to the
illustration shown here.
5 Press to select a language, then press
OK .
Tip
You can set the default language for DVD disc menu
(see ‘Adjust settings’ > ‘Preferences’ > [Disc Menu] ).
General Setup
Screen Saver
Disc Lock
EasyLink Setup
Display Dim
DivX(R) VOD Code
Sleep Timer
Auto
Español
Français
English
OSD Language
Find the correct viewing
channel
1 Press to turn on the Home Theater
System.
2 Press DISC to switch to disc mode.
3 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
Press
SOURCE button repeatedly
on the remote control of your TV.
Set the TV to channel 3 or 4 if a RF
modulator is used.
Tip
The video-in channel is between the lowest and
highest channels and may be called FRONT, A/V IN,
VIDEO, HDMI etc.. See the TV user manual on how
to select the correct input on your TV.
Get started
English
EN
1_hts3371D-72D_F7_en 3.indd 19 4/30/2009 8:38:34 PM