Philips FWV357/55 Stereo System User Manual


 
17
3139 115 21373
English
CD/VCD/MP3-CD Operations
Sound Quality
Ta ke note that MP3-CD compilations should
best contain only MP3 tracks (.mp3). To
achieve a good MP3 quality, a bit rate of
128 kbps is recommended.
Loading discs
1 Press OPEN/CLOSE to open the disc tray.
2 Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
The disc tray will rotate until the empty tray
is ready for loading.
3 Press OPEN/CLOSE to close the disc tray.
"READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
For MP3 disc, the name of the first album
and title will be scrolled through the display once
and followed by "AXX TXXX".
Notes:
Load the discs with the label side facing up.
–For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
Playing discs
a disc is loaded in the disc tray
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
To play all discs on the disc tray
PressÉÅ .
All the available discs will play once, then stop.
During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
For MP3 disc, TITLE is shown. For mixed
mode discs, only one mode will be selected for
playback depending on the recording format.
To play the selected disc only
In CD mode, press VCD 1, VCD 2 or VCD 3
on the system.
The selected disc will play once, then stop.
To interrupt playback
PressÉÅ.
The current track time flashes.
To resume playback, pressÉÅ again.
To stop playback
Press Ç.
Replacing discs during playback
1 Press DISC CHANGE.
The disc tray will open without interrupting
current playback.
2 To change the inner disc, press DISC
CHANGE again.
"DISC CHANGE" is displayed and the disc
will stop playing.
The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
pg 001-034-FWV357-Eng 2005.8.16, 10:1917