28
English
3140 115 29791
Tape Operation / Recording
To select another track during recording
1 PressÉÅ to interrupt recording.
2 Press numeric keys 0-9 on the remote
control to select the desired track.
➜ The desired track will start playing.
To stop recording
● Press Ç.
➜ Recording and disc playback will stop
simultaneously.
Dubbing tapes
1 Press TAPE to select tape mode.
2 Load the prerecorded tape in tape deck 1.
● You can set the tape to the desired passage
where recording will start.
3 Press RECORD.
➜ Playing and recording will start simultaneously.
➜ "DUB" is displayed.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
Microphone mixing
Connect a microphone (not supplied) to the
system allowing you to sing along with the music
source.
1 Connect a microphone to the MIC jack.
● Before connecting the microphone, set the
microphone MIC LEVEL to the minimum level
to prevent howling sound.
Karaoke
2 Press VCD 1/2/3, TUNER, TAPE or AUX to
select the source to be mixed and start playback.
3 Adjust the volume level of the source with
MASTER VOLUME control.
4 Adjust the microphone volume with microphone
MIC LEVEL control.
Note:
– Keep the microphone away from the speakers to
prevent howling.
For Recording, please refer to “Tape
Operation/Recording”.