Filter
Top Products
20
English
3140 115 29791
Adjusting the TV system
Before viewing the video CD, ensure that the
mini system is switched to corresponding PAL or
NTSC system of your TV set (except Multi–
system TV).
1 In CD/VCD mode, press and hold VCD 1 for
more than three seconds.
2 Press and hold VCD 1 again to switch between
PAL or NTSC.
➜ The setting will remain after it has been set.
Note:
– Before adjusting the TV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
On screen display (OSD)
If you are playing a video CD, your TV screen will
able to display the messages of the current
operating status (for example, PLAY, STOP) and
the information stored in the disc.
● Press OSD on the remote control repeatedly to
switch on or off the On Screen Display mode.
When OSD is switched on, you can see the
following display on the TV screen.
PLAY XX/TT MM:SS
–"XX" is the current track.
–"TT" is the total tracks.
–"MM" is in minutes.
–"SS" is in seconds.
Note:
– You can also view the information from a
MP3-CD or normal CD.
VCD Operations