Philips FW-V330 Stereo System User Manual


 
14
English
3140 115 29791
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
In standby mode, press and holdÇon the
system until "WELCOME" is displayed.
The demonstration will begin.
To deactivate the demonstration
Press and holdÇon the system until
"DEMO OFF" is displayed.
The system will switch to standby mode.
Note:
If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Switching the system on
In standby/demonstration mode
Press STANDBY ON to switch on the last
selected source.
Press VCD 1/2/3 (VCD.CD 1/2/3), TUNER,
TAPE (TAPE 1/2) or AUX.
Press OPEN/CLOSE.
The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
Press and hold Ç on the system.
In any other source mode
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in standby mode.
Dim mode
You can select the desired brightness for the
display.
In any source mode (except standby mode),
press DIM repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
DIM is shown, except for DIM OFF mode.
Note:
In standby mode, pressing DIM to select half or
full brightness for clock display.
Volume control
Adjust MASTER VOLUME (or press
VOLUME + or - on the remote control) to
increase or decrease the volume level.
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the
system.
The speakers will be muted.
Basic Functions