Filter
Top Products
3139 116 20021
15
English
CD - VCD
Below is an example of the OSD message.
SINGLE ELAPSED
PLAY XX/TT MM:SS
Notes:
– "XX" is the current track.
– "TT" is the total tracks.
– "MM" is in minutes.
– "SS" is in seconds.
When OSD is switched off; there is no
information indicated on the TV screen.
Playing a Video CD with PBC
VCDs with PBC (Play Back Control) will be
indicated on the display of the set and on
your TV screen as soon as they are
inserted. PBC is a predefined play
sequence stored on the VCD.
1 Switch on the TV, insert a VCD with PBC
and press ÉÅ to start playback.
2 MENU appears on the TV screen.
If a menu consists of a list of titles you can
select a sequence directly.
1 Select your choice with the digit keys
0 - 9 on the remote control. The VCD
starts playing of the selected sequence
automatically.
2 Press RETURN ( ) to go back to the
previous menu.
Note:
– If a menu consists of more than one
page, it is possible to go through the
pages with PREV./NEXT on the set or
remote control.
Switching off PBC
• It is possible to switch off PBC in STOP
mode by pressing the PBC button. Now
this VCD can be treated like a normal
VCD.
™ The TV display will show
< PBC OFF > .
Notes:
– In PBC mode PROGRAM is not active.
– The MENU structure depends on the
program stored on the VCD. Please refer
to the information supplied with the
disc.
Slow
1 Press SLOW on the remote control to
watch a VCD in a slow speed. There are
3 types of slow modes to select.
™ "SLOW 1" , "SLOW 2" or
"SLOW 3" appears on the TV
screen.
2 PressÉÅ again to resume playback at
normal speed.
Note:
– Audio is muted in Slow mode.
Resume
This feature is also applicable to audio CD.
1 Press Ç to stop playback.
2 Press RESUME on the remote control
to start playback again from where you
have stopped.
™ "RESUME" appears on the display.
Note:
– Resume information is lost if you select
another disc or the set is disconnected
from the mains, the system is switched
to standby mode or when you change
source.
– Resume is not available when PBC
mode is switched on.
Pause
1 PressÉÅ to have a still picture on the
TV screen.
™ "PAUSE" appears on the TV screen.
2 PressÉÅ again to continue playback.
Note:
– Audio is muted during Pause.
Zoom
This feature enables you to view a still
picture frame in an enlarge mode.
After you have pressedÉÅ to have a still
picture on the TV screen.
1 Press ZOOM once to enlarge the still
picture by 2 times.
™ "ZOOM" appears on the TV screen.
• You can move the zoom picture left or
right by pressing à or á
respectively.
• You can move the zoom picture down or
up by pressing í or ë respectively.
2 Press ZOOM once more to return to
normal still frame.
3 PressÉÅ again on the remote control
to continue playback.
A-B Repeat
This feature is also applicable to audio CD.
To play a certain scene or passage of the
disc repeatedly.
1 Press A-B on the remote control during
playback to mark the start of the chosen
scene or passage.
™ "SET A" appears on the display.
2 Press A-B again to mark the end of the
chosen scene or passage.
™ "SET B" appears on the display.
™ The selected scene or passage is
played repeatedly.
™ "PLAY AB" appears on the display.
Untitled-1 31/05/2001, 11:35 AM15