Philips FW-V28 Stereo System User Manual


 
3139 116 20021
11
English
OPERATING THE SYSTEM
Easy Set
EASY SET allows you to store all available
radio stations automatically.
Press and hold STANDBY ON
(on the
system only)
for
5 seconds
when the
system is in standby or demonstration
mode.
EASY SET will be displayed, and
followed by TUNER and then
AUTO.
EASY SET will start searching for all
radio on FM band and then followed
by radio stations on MW band.
All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
EASY SET will start with the FM band, if
there are still presets available, the
system will continue to store the MW
band.
When EASY SET is used, all previously
stored radio stations will be replaced.
The last preset radio station will appear
on the display when EASY SET is
completed.
Switching the system ON
Press VCD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
You can also switch on the system by
pressing the OPEN•CLOSE or DISC
CHANGE button.
Switching the system to
standby mode
Press STANDBY ON or B on the
remote control.
The system will switch to standby
mode.
Selecting the Source
Press the respective source selection
button: VCD, TUNER, TAPE or AUX.
The display indicates the selected
source.
Note:
For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX
IN terminals.
DIM mode
You can select the desired brightness for
the display.
Press DIM to select DIM 1, DIM 2, DIM
3 or DIM OFF display mode.
The DIM appear on the display.
"DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with Spectrum
Analyzer On
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the
system will be switched off.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
Untitled-1 31/05/2001, 11:35 AM11