Filter
Top Products
17
English
EN
You probably see some symbols displayed
before the station names as follows:
H: Indicates that the station is one of 10
most-listened stations by you based on
DAB radio's monitoring.
?: Indicates that the station is not currently
available, or not active.
: Indicates that the station is a primary
station with secondary service.
: Indicates that the station is a
secondary station.
Program DAB radio stations manually
You can program a maximum of 30 preset DAB
radio stations.
1 Tune to a DAB station.
2 Press PROG on the remote control to
activate programming.
3 Press / on the remote control to
allocate a number (1-30) for the preset.
4 Press PROG
Note
If a DAB station is already stored under a preset
location, new DAB station assigned to this location will
overwrite the old DAB station.
DAB station presets will not overwrite FM presets.
Scan for new DAB stations
New stations and services will be regularly
added in the DAB broadcast. To make new
DAB stations and service available on your DAB
radio, a search is needed.
In DAB mode, press SCAN.
» The unit starts to scan for DAB stations.
Listen to a preset DAB radio station
Press / to select a preset number on the
main unit.
Display DAB information
line shows station name, and the second line
shows the service information for the current
station. Seven types of service information are
available.
Press RDS/DISPLAY repeatedly to cycle
through the display information (if available).
» Dynamic label segment (DLS)
» Program type (PTY)
» Ensemble Name
» Time
»
» Bit rate and audio status
» Signal error rate
Tip
To display picture information from DAB station,
download and isntall a free app "Digital Radio" from
App Store on your iPod touch/iPhone/iPad.
Use DAB menu
1 In the DAB mode, press MENU to enter
the DAB menu.
» [Station list]
displays.
2 Press / to scroll the menu options:
[Station list]
[Full scan]
[Manual tune]
[DRC]
[Prune]
[System]
3 To select an option, press ENTER.
4 Repeat step 2-3 if sub-option is available
under one option.
Full scan
Full scan is used to perform a wide range of
DAB radio search.