Philips DCB852 Stereo System User Manual


 
11
English
EN
3 Get started
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in

If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. _____________________________
Serial No. ______________________________
Connect power
Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the apparatus.
Risk of electric shock! When you unplug the AC cable,
always pull the plug from the socket. Never pull the
cord.
Before you connect the AC cable, ensure that you have
completed all other connections.
Connect the AC cable to the wall outlet.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,

Danger of explosion if battery is incorrectly replaced.

To insert the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
If you are not going to use the remote control for a
long time, remove the batteries.
Do not use old and new or different types of batteries
in combination.
Batteries contain chemical substances, so they should
be disposed of properly.
a
b
c