Filter
Top Products
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the STOP position, press PROG to start
programming.
➜ Display shows 01 indicating the start of
the program. PROG and 01 flashes. (See
4)
2 Press
∞
or
§
to select your desired track
number.
3 Press PROG to store the desired track.
➜ Display shows 02 (up to 20 in
sequence), indicating the next program
location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press
2;
to play the program.
To review your program
In the stop position, press PROG
➜ The display shows all the stored tracks in
sequence.
Helpful hints:
– If you try to store more than 20 tracks, no
track can be selected and the display will
show all your stored tracks in sequence.
– If you press PROG and there is no track
selected, 01 is displayed.
To erase a program
You can erase a program by:
– pressing
9
(twice during playback or once
in the stop position);
– selecting RADIO or TAP E sound source;
– opening the CD door;
➜ Display: PROG disappears.
Selecting different playing
modes
During playback, you can select the playing
modes by pressing REPEAT and SHUF-
FLE once or more.
(REPEAT flashes) – plays the cur-
rent track continuously. (See 5)
REPEAT – plays the entire CD/program
continuously.
SHUFFLE – plays all tracks in random
order.
REPEAT SHUFFLE – repeats the entire
CD/program in random order. (See 6)
•To return to normal playback, press
REPEAT or SHUFFLE until the REPEAT
or SHUFFLE modes are no longer shown.
REPEAT
CD Player
Ta pe operation/recording
Playing a tape
1 Adjust the source selector to
TAPE/OFF.
2 Press
9
/ to open the cassette holder, insert
a cassette and close the deck.
3 Press
1
to start playback.
To pause playback,
• Press 8.
To r esume playback,
• Press 8 again.
To stop playback,
• Press
9
/.
Helpful hints:
– The keys are automatically release at the end
of the tape, and the set is switched off except
if 8 has been activated.
Fast forwarding/rewinding
1 Press 5 or 6 until you reach your desired
passage.
2 Press
9
/ to stop rewinding/fast forwarding.
General information on recording
• Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
• For recording, use only NORMAL type cas-
settes (IEC type I) on which the tabs have not
yet been broken.This deck is not suited for
recording on CHROME (IEC II) or METAL
(IEC IV) type cassettes.
• The best recording level is set automatically.
Altering the VOLUME and DBB controls
will not affect the recording.
•To protect a tape from accidental erasure,
break out the tabs. If you wish to record
again, cover the tabs with a piece of adhesive
tape.
CD synchro start recording
1 Select CD source.
2 Insert a CD and if desired, program track
numbers.
3 Press
9
/ to open the cassette holder. Insert
a blank tape and close the deck.
4 Press
0
to start recording.
•Playing of the CD programme starts automat-
ically from the beginning of the programme.
You don’t need to start the CD player sepa-
rately.
To pause recording,
• Press 8.
To r esume recording,
• Press 8 again.
To stop recording,
• Press
9
/.
Cassette Recorder