Filter
Top Products
12) To adjust the bottom right purity, press the or button.
13) When the bottom right purity is adjusted, press the
button to return to the EXTRA CONTROLS
window. BACK TO MAIN CONTROLS is highlighted.
Smart
Help
After returning to EXTRA CONTROLS . . .
. . . to continue to ADJUST PURITY, press the
button until AUTO CALIBRATE is
highlighted. Next, start with step 4 under EXTRA CONTROLS - AUTO CALIBRATE.
. . . to exit completely, press the
button twice.
AUTO CALIBRATE (Not available in all models)
EXTRA CONTROLS is a set of three features, including AUTO CALIBRATE. Auto Calibrate regularly
readjusts the color to its original value for any of the ADJUST COLOR selections, including USER PRESET.
AUTO CALIBRATE also adjusts the luminance and black level of the monitor, so that all three items remain
at original settings. This helps extend the useful life of the monitor. The calibration process takes less than 6
seconds to complete.
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until EXTRA CONTROLS is highlighted.
201P The OSD Controls
file:///G|/manual/english/201P/osd/osd_cont.htm (30 of 32) [10/16/1999 6:36:37 AM]