Filter
Top Products
6) To adjust the horizontal moire, press the or button.
7) When the moire is adjusted, press the
button to return to the EXTRA CONTROLS window. BACK
TO MAIN CONTROLS will be highlighted.
Smart
Help
After returning to MAIN CONTROLS . . .
. . . to exit completely, press the
button.
ADJUST CONVERGENCE (Not available in all models)
EXTRA CONTROLS is a set of features, including ADJUST CONVERGENCE. Convergence is a process
by which a color is created by blending other colors. For example, white is created by blending red, blue,
and green. If these colors do not completely blend together (converge) then you may see unwanted red,
green, or blue lines or dots. To adjust the convergence, follow the steps below. Note: Use only if necessary.
Remember: you must degauss the monitor BEFORE adjusting the convergence.
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until EXTRA CONTROLS is highlighted.
201P The OSD Controls
file:///G|/manual/english/201P/osd/osd_cont.htm (24 of 32) [10/16/1999 6:36:37 AM]