Filter
Top Products
7
SPECIFICATIONS
1
@ 120 V AC, 60 Hz
2
Stereo mode, both channels driven
3
Typical Value
4
Input attenuator set FCW
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
TM
®
Output Power
2, 3
:
2 ohms, 1 kHz, 1% THD
4 ohms, 1 kHz, 1% THD
8 ohms, 1 kHz, 1% THD
(Bridge mode, mono)
4 ohms, 1 kHz, 0.006% THD
8 ohms, 1 kHz, 0.005% THD
Rated Output Power
2
:
4 ohms, 20 Hz to 20 kHz, 0.1% THD
8 ohms, 20 Hz to 20 kHz, 0.07% THD
Slew Rate
3
:
Stereo mode, each channel
Bridge mode, mono
Total Harmonic Distortion
2, 3
:
20 Hz to 20 kHz, @ rated output power, 8 ohms
Input Sensitivity & Impedance
4
:
@ rated output power, 8 ohms
Dimensions & Weight:
Height
Width
Depth
Weight
Frequency Response
2, 3
:
±1 dB, 1 W RMS, 8 ohms
±0.2 dB, @ rated output, 8 ohms
Damping Factor
2 ,3
:
8 ohms, 1 kHz
Hum & Noise
2
:
Below rated output power, 8 ohms
Power Consumption
2
:
@ rated output power, 8 ohms
Cooling System:
DDT™ Compression System:
600 W RMS per channel
450 W RMS per channel
270 W RMS per channel
1200 W RMS
900 W RMS
400 W RMS per channel
240 W RMS per channel
20 volts per µSec
40 volts per µSec
Less than 0.07%
1.0 V RMS (0 dBV)
20 K ohms (32 dB gain)
5.25" (13.3 cm)
19" (48.3 cm)
15" (38.1 cm)
45 pounds (20.5 kg)
10 Hz to 40 Hz
20 Hz to 20 kHz
Greater than 300
100 dB, unweighted
8.6 A @ 120 V AC
2-speed fan
Switchable with LED