Filter
Top Products
12
The loudspeaker outputs of the mixer/amplifier are 4 Ohms, 8 Ohms, 70V and 100V.
CCoonnnneecctt tthhee
lloouuddssppeeaakkeerr ssyysstteemm ttoo aannyy OONNEE ooff tthheessee oouuttppuuttss..
Class 2 wiring may be used.
There are two types of output: 4 Ohm Direct Output;
8 Ohm, 70V, and 100V via Output Transformer
The method of connection differs in each case. Refer to
FFiigguurree 77
. If using the transformer
isolated outputs be sure that the Low Cut switch is ON.
Note: Impedance values shown in Figure 7 indicate total loudspeaker system (load) impedance.
MMMMAA88335522 ((112200VV))
Figure 7