Filter
Top Products
11
MMMMAA8811550022 ((223300VV))
MMMMAA88775522 ((112200//223300VV))
Figure 5
Figure 6
The loudspeaker outputs of the mixer/amplifier are 4 Ohms, 8 Ohms, 70V and 100V.
CCoonnnneecctt
tthhee lloouuddssppeeaakkeerr ssyysstteemm ttoo aannyy OONNEE ooff tthheessee oouuttppuuttss..
Class 2 wiring may be used.
There are two types of output: 4 Ohm Direct Output;
8 Ohm, 70V, and 100V via Output Transformer
The method of connection differs in each case. Refer to
FFiigguurree 55
. If using the transformer
isolated outputs be sure that the Low Cut switch is ON.
Note: Impedance values shown in Figure 5 indicate total loudspeaker system (load) impedance.
The loudspeaker outputs of the mixer/amplifier are 4 Ohms, 8 Ohms/25V, 70V and 100V.
Connect the loudspeaker system
ttoo
any ONE of these outputs. Class 2 wiring may be used.
There are two types of output: 4 Ohm Direct Output;
8 Ohm/25V, 70V, and 100V via Output Transformer
The method of connection differs in each case. Refer to
FFiigguurree 66
. If using the transformer
isolated outputs be sure that the Low Cut switch is ON.
Note: Impedance values shown in Figure 6 indicate total loudspeaker system (load) impedance.