Filter
Top Products
1
0dB
-6
-
0dB
-6
-
0dB
-6
-
0dB
-6
-
www.crestaudio.com
Crest Audio, Inc.
Fair Lawn, NJ USA
Designed and manufactured in the USA by:
Outputs
Class 2 Wiring
Inputs
Gain
Ch 4
0dB
x40
Gain
Ch 3
0dB
x40
HPF
Gain
Ch 2
0dB
x40
Gain
Ch 1
0dB
x40
HPF
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, THIS APPARATUS SHOULD NOT BE EXPOSED TO RAIN OR
MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHOULD NOT BE PLACED ON THIS APPARATUS.
AVIS:
DANS LE BUT DE REDUIRE LES RISQUES D’INCENDIE OU
DE DECHARGE ELECTRIQUE, CET APPREIL NE DOIT PAS ETRE
EXPOSE A LA PLUIE OU A L’HUMIDITE ET AUCUN OBJET REMPLI
DE LIQUIDE, TEL QU’UN VASE, NE DOIT ETRE POSE SUR CELUI-CI.
AVIS:
RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MOUNT IN RACK ONLY.
INSTALLER SUR SUPPORT DE MONTAGE SEULEMENT.
220 Watts @ 70.7 V
220 Watts @ 8 Ohms
160 Watts @ 4 Ohms
Output Power per Channel
+
Ch
1
+
Ch
2
+
Ch
3
+
Ch
4
Each channel input features a 21-position stepped attenuator ranging from
negative infinity to 0 dB. The “halfway” position of the stepped attenuator is
-6 dB, as indicated on the unit.
An individual Gain Select is available on each channel input. This two-
position switch can be set at 0 dB in the bottom position and x40 in the
top position.
If the circuit breaker pops, turn the unit OFF and let sit for one minute and
then turn back ON. If the circuit breaker pops a second time, the unit may
be damaged and should be returned to a Crest Audio dealer for servicing.
This two-position switch provides enabling or bypass of a high-pass filter,
which is available on each channel input. In the top position (enabled), the
high-pass filter cutoff is 70 Hz. In the bottom position (disabled), the input
frequency range is extended down to 1 Hz. The top and bottom positions
of the high-pass filter are indicated on the unit by a sloped line and a flat
line, respectively.