Filter
Top Products
Continuous Power Output – Stereo
45 watts RMS x 2, 20 Hz-20 kHz, 8 Ω,
both channels driven
60 watts RMS x 2, 20 Hz-20 kHz, 4 Ω,
both channels driven
Continuous Power Output – Mono
90 watts RMS, 20 Hz-20 kHz, 8 Ω
minimum impedance
Current Capacity
12 amps peak per channel
Frequency Response
5 Hz - 100 kHz, +0/-3 dB, 1 watt
Total Harmonic Distortion
0.07%, at 8 Ω, 0.1% at 4 Ω, full output
0.02%, average listening levels
IM Distortion
0.05 %
Transient IM Distortion
Not measurable
Slew Rate
90 V/µsecond
S/N Ratio
116 dB, input shorted, IHF A-weighted
Input Impedance
33 k Ω
Input Sensitivity
600 mV; 1.5 V for full output
Dynamic Headroom
1.5 dB
Inter-Channel Crosstalk
80 dB at 1 kHz; 60 dB at 20 kHz
Damping Factor
400 at 20 Hz
Audio Trigger Sensitivity
5 mV to 200 mV
12V Trigger Current Requirement
15 mA
AC Power Requirement
110 – 120 V / 220 -240 V, 50 – 60 Hz
1 watt standby; 220 watts full output
Dimensions
9
1
⁄2
" Wide
10" Deep with connectors
2" High with feet, 1
3
⁄4" panel only
241 x 254 x 50mm, 44.1mm panel only
Net and Shipping Weight
6.65 lbs., 3 kg; 9 lbs., 4.1 kg
Rack Mount Accessories
May be Purchased Separately
SBS: Bracket and bolts to attach two
Z series units side-by-side in a standard
19" equipment rack.
Zblank: 9
1
⁄2" x 1
3
⁄4" blank panel, required
to mount a single Z series unit; Zblank kit
includes one SBS.
PARASOUND ZAMP V.3 SPECIFICATIONS
10
Parasound Products, Inc. 950 Battery Street, San Francisco, CA 94111
Customer Service 415-397-7100 / Technical Dept. 415-675-7272 / Fax 415-397-0144
www.parasound.com
Rev 0.91 © Parasound Products, Inc. 2004