Filter
Top Products
-4-
Remote Control Handset
The Remote Control Handset duplicates all front panel functions except power on/off. It also contains
several additional functions. The remote uses 2 AA batteries; be sure to observe correct polarity.
Repeat
If you press this button, the disc will play over and over until you press the STOP or REPEAT button
again.
Display
Press this button once to change from normal mode to time remaining on disc, press twice for time
elapsed on disc, press three times to return to the normal mode.
Program
Programming allows you to select specific tracks or rearrange the entire play sequence. Programming
must be performed in the STOP mode. To store tracks on a disk, select the track number with the
number or SKIP buttons on the remote handset. Next, press the PROGRAM button to store the selected
track. The display will indicate 01 for the first programmed track. The display will then flash 02 until
you select the next track and press PROGRAM. Repeat this procedure for each of the tracks you want
to store. A maximum of 20 tracks may be programmed. Once the PLAY/PAUSE button is pressed, the
tracks will play in programmed order.
Checking, Changing, and Clearing Program
Each time you press the PROGRAM button, the track number and its program position will appear in
the display. You can add tracks to the program by pressing PROGRAM for the track you want to add.
Tracks can be cleared individually by pressing the CLEAR button for the track you want to delete.
Other Display Functions
When you first play your C/DP-1000, its display panel will show you if the unit has recognized a play-
able undamaged CD in its disc compartment. You will hear the machine spin for a moment while it
studies the data coded onto the disc. If there is no disc present, the display will indicate four zeros.
Once there is a disc loaded, the system will scan the information on the disc, from beginning to end, and
will briefly show you how many tracks and the total playing time contained on that disc.
After displaying the track and playing time information, the unit will stop at track 1 and wait for you to
press the PLAY button. At the end of the disc, the display will read 0:00 after the unit has stopped.
2
TRACK
02 :31
MIN
SEC
-15:45
MIN
SEC
02:31
MIN
SEC
First Press: Time remaining on disc
Second Press: Time elapsed on
disc.
5
PRGM
3
02
PRGM
TRACK
When programming is finished,
press PLAY to start programmed
play.
Press SKIP or track number for
next track to program. Press PRO-
GRAM again to store
4
01
PRGM
TRACK
20
TRACK
Select track number directly or with
the SKIP button. Press PROGRAM
to store
Normal mode