Filter
Top Products
11
Setup Menu Options
The CD 1 includes a setup menu for several operational preferences. To enter the setup menu first eject
and remove a CD that might be in the player. Next press the “ > ” button on the front panel and the first
setup option will appear on the front panel display. Press the “ > ” button again to see the next setup
option.
Eject At Power Off
The CD 1 comes from the factory set to eject a CD when you turn it off.
Press the front panel “Play-Pause” button to toggle between the two options:
Yes: The CD will be ejected when you turn the CD 1 off. This is the factory default setting.
No: The CD will not be ejected when you turn the CD 1 off.
Note: If a CD is blocked during ejection the CD will be pulled back into the CD 1 and play again.
You should choose “No” if your CD 1 is installed in a cabinet with a door that might prevent the CD
from properly ejecting from the player.
Sound While Winding (Fast Forward or Fast Back):
The CD 1 comes from the factory so you cannot hear anything during fast forward and fast back
operation.
Press the front panel “Play-Pause” button to toggle between the two options:
Yes: When pressing the “<<” or “>>” buttons on the remote control or when pushing down the
“<” or “>” buttons on the front panel you will hear a short clip of audio. Two seconds of
play will be audible every 20 seconds. This can be useful when you are trying to find a
specific section on your CD.
No: No sound will be heard during fast forward or fast back. As a result, fast forward and fast
back will move much faster as you search for a particular elapsed time on the CD. This
is the factory default setting.
Store (save) Settings:
You must take this additional step to save your changes. Press the “Play-Pause” button to save any
changes you might have made. If you fail to press the Play-Pause button your choice will not be
saved.
Restore Defaults
If you want to restore your CD 1 to its factory defaults press the “Play-Pause” button. The factory
defaults are set to eject the CD upon turn off and no sound while fast forward or back.
Software Version
This will display the software version installed on your CD 1.