Filter
Top Products
Fig. 5c
Fig. 5a
8
Your new subwoofer has a textured finish in neutral white to blend into any area. It may also be painted to
match any décor. If you plan to paint your subwoofer, to avoid “painting it to the wall”, we recommend that
you paint it before installation.
Please note:
• Do not paint the surface behind the grille
• Do not heat-cure your newly painted subwoofer
• Avoid painting the subwoofer’s rear surface—protect it by masking the surface
(paint mask included)
To Paint, Follow These Steps:
1) Remove the metal grille and position the paint mask
(included)
in its place;
2) In a well-ventilated area, apply several light coats of paint, letting the subwoofer housing dry completely
between coats. Follow the paint manufacturer’s directions;
3) When painting grille, be careful n ot to plug holes with paint and re-attach after paint has dried. It is
easier to spray the grille than to use a brush. Remove grille before painting
.
COLOR-MATCH PAINTING
(optional)
Connect subwoofer as outlined in the Owners Manual included with your Paradigm
®
subwoofer amplifier.
INSTALLATION INTO A WALL WITHOUT A BACKBOX
Positioning block should be at bottom, facing you as
you tip frame into wall.
Fig. 5b
Peel tape back.