Filter
Top Products
49
How to operate
Step 1
Press the [SEARCH] button on the front panel.
→ The recording event list window will be displayed.
Step 2
Move the cursor into the recording event tab and
move the cursor onto the [Select Medium] button.
Then, press the [SET] button on the front panel.
→ The "Select Medium" window will be displayed.
Step 3
Select the media to be searched. Select "DVD Drive"
or "SD memory card" by pressing the [SET] button,
and then press the [SET] button again after moving
the cursor onto the [OK] button.
→ The copied data list window will be displayed.
Note:
• Whenselecting"DVDDrive"eventhoughan
optional built-in DVD drive is not installed, the
error message of "No media is inserted" will be
displayed.
Step 4
Select search filters. Move the cursor onto the
[Filtering] button, and then press the [SET] button on
the front panel.
→ The "Filtering" window will be displayed.
Step 5
Specify the search conditions (filters). Refer to page
47 for further information about the search filters.