8.2. Schematic Diagram Notes
This schematic diagram may be modified at any time with the development of
new technology.
Notes:
S201
:
Volume control switch (+)
S202
:
volume control switch (-)
S203
:
Skip/search switch ( )
S204
:
Skip/search switch ( )
S206
:
Play/stop switch ( )
S207
:
Cover open/close det. switch
S208
:
Hold switch in “OFF” position. (HOLD)
- Indicated voltage values are the standard values for the unit measured by the
DC electronic circuit tester (high-impedance) with the chassis taken as
standard. Therefore, there may exist some errors in the voltage values,
depending on theinternal impedance of the DC circuit tester.
No mark: MD STOP
( ): MD play [1kHz, L+R, 0dB]
Important safety notice:
Components identified by mark have special characteristics important for
safety.
Furthermore, special parts which have purpose of fire-retardant (resistors), high-
quality sound (capacitors), low-noise (resistors), etc. are used. When replacing
any of components, be sure to use only manufacture's specified parts shown in
theparts list.
Caution!
IC and LSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
Cover the parts boxes made of plastics with aluminum foil.
Ground the soldering iron.
Put a conductive mat on the work table.
Do not touch the legs of IC or LSI with the fingers directly.
42