Filter
Top Products
9
Setup
9
RQTX0125
ENGLISH
[Compatible model: e.g. SC-BT100]
To activate the additional SH-FX67 for 7.1ch-setup, it is necessary to be
paired to work with the other SH-FX67.
≥Keep the transmitter cards of the additional wireless system for later
use.
Preparation
≥Make sure to connect the AC power supply cord of the additional
wireless system.
≥Turn on the home theater unit and reduce the volume.
1 Turn on the additional wireless system.
2 While pressing the skip and slow-search button (e.g. [9/5] ) on
the home theater unit, press the numbered button [3] on the remote
control until “P” lights in the home theater unit’s display.
≥The indicator on the additional wireless system turns green.
3 While “P” is displayed, press [I/D SET]
on the rear of the additional wireless
system.
≥If “P” goes off before you press
[I/D SET], repeat step 2 and then
continue the procedure.
4 While pressing [9/5] on the home theater unit, press the
numbered button [3] on the remote control.
5 Turn off and on the additional wireless system.
≥Make sure the indicator on the additional wireless system lights up
green.
[Note]
≥If you should change the transmitter card, repeat the pairing steps for
both units of the wireless system.
≥You cannot use the wireless system with SH-FX65T transmitter card.
Using the surround back speakers
Use only the SH-FX67T transmitter card.
Wireless system is originally paired to work with the SH-FX67T
transmitter card that comes along with it. For any other accessories
to work with the SH-FX67T transmitter card in use, pairing is
necessary.
Pairing is necessary.
Wireless system
Home theater unit
Additional wireless system
e.g. After pairing
Use a pointed object
.
SH-FX67_RQTX0125_En_071207.fm Page 9 Friday, December 7, 2007 3:41 PM