Panasonic SC-PT 250 Speaker System User Manual


 
DISC OPERATIONS
ENGLISH
22
RQT8043
RQTX0055
Using on-screen menus (continued)
*2
For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait
Functions menu (continued)
ZOOM
To select various zoom sizes
Example:
N
ZOOM
ORMAL NO R AML
NORMAL
AUTO
x2
x4
SOURCE SELECT
When you select “AUTO” the constructing method of the DivX contents is automatically distinguished
and output. If the picture is distorted, select “INTERLACE” or “PROGRESSIVE” depending on which
constructing method was used when the contents were recorded to disc.
AUTO
INTERLACE
PROGRESSIVE
Example:
N
SOURCE ESCLE T
ORMAL NO R AML
UA T O
DIALOGUE ENHANCER
To make the dialogue in movies easier to hear
Example:
O
DIALOGUE AENH RNCE
FF
OFF
(Dolby Digital, DTS, MPEG, 3-channel or higher, with the dialogue recorded in the center
channel)
(Dolby Digital, 3-channel or higher, with the dialogue recorded in the center channel)
OFF ON
Dolby PL II
OFF MOVIE MUSIC
(\ page 29, Enhancing the stereo sound : Dolby Pro Logic II)
Example:
O
Dol by PLII
FF
OFF
KARAOKE MODE
*2
OFF ON (\ page 30, Enjoying Karaoke)
Example:
O
KARAOKE MODE
FF
TRANSFER MODE
Example:
N
TRANSFER DMO E
ORMAL
AUTO
NO R AML
If you have set “VIDEO OUT (I/P)” to “PROGRESSIVE” (\ page 24, “VIDEO” tab), press [5, ] to
select the method of conversion for progressive output to suit the type of material.
• The setting will return to AUTO or AUTO1 when the disc tray is opened.
When playing PAL discs or MPEG4 or DivX video contents
AUTO : Automatically detects the fi lm and video content, and appropriately converts it.
VIDEO : Select when using AUTO, and the content is distorted.
FILM : Select this if the edges of the fi lm content appear jagged or rough when
AUTO is selected. However, if the video content is distorted as shown in the
illustration to the right, then select AUTO.
When playing NTSC discs
AUTO1 : Automatically detects the fi lm and video content, and appropriately converts it.
AUTO2 : In addition to AUTO1, automatically detects fi lm contents with different frame rates and
appropriately converts it.
VIDEO : Select when using AUTO1 and AUTO2, and the content is distorted.
RQTX0055-B_Out_new14.indd 22RQTX0055-B_Out_new14.indd 22 3/16/07 6:48:41 PM3/16/07 6:48:41 PM