Filter
Top Products
11
VQT5J68
The first time “D.Connect” is set to “On”, a password for this
system’s network is randomly created and memorized in this
system.
• This password is memorized until it is changed.
1 While “D.Connect” is set to “On”:
Press [SETUP] repeatedly to select “D.Connect”.
2 Press [2, 1] to select “On” and then press [OK].
3 The current password is displayed.
• The 5 digits after “PW” is the password for this
network.
4 Press any button to exit.
1 While “D.Connect” is set to “Off”:
Press [SETUP] repeatedly to select “D.Connect”.
2 Press [2, 1] to select “Change PW” and then press
[OK].
3 Press [2, 1] to select “OK? Yes” and then press
[OK].
4 The new password is displayed.
• The 5 digits after “PW” is the new password for
this network.
5 Press any button to exit.
∫ Note about changing the password
After changing this system’s network password, if you are not
prompted to change the password on the other devices, the
following changes are required.
iOS device (iPod touch/iPhone/iPad)
*
1
:
• Before choosing this system’s network,
1 Select [ ] located beside this system’s wireless
network name.
2
Select “Forget this Network” and then select “Forget”.
3 Select this system’s wireless network and enter the
new password.
Mac/PC:
• If the computer has memorized the old password, be sure
to change the memorized password for this system’s
network to the new one.
• Refer to the devices’s operating instructions for details.
*1:
Steps are based on iOS 6.0.1.
Playing back music files on the
DLNA server
You can share music files stored in the DLNA Certified media
server (PC with Windows 7 installed, smartphone, etc.)
connected to your home network, and enjoy the contents with
this system’s speaker.
Preparation
• Complete the network settings. (> 6)
• Connect your device with DMC (Digital Media Controller)
compatible software installed to the same home network
as this system.
• Add the contents and folder to the libraries of the Windows
Media
®
Player or the smartphone, etc.
– Playlist of Windows Media
®
Player can play back only
the contents that are stored in the libraries.
1 Turn this system on.
• Check that “ ” is indicated on the display.
• If it doesn’t be indicated, check the network
settings. (> 6)
2 Operate the DMC compatible device and connect to
this system.
• The device name of this system will be displayed
as “Panasonic PMX9 _ _ _ _ _ _”*
1, 2
.
• For details on how to use DMC compatible
devices, refer to the operating instructions of the
devices or the software.
∫ Support format of DLNA client
File formats that are not supported by your DLNA server
cannot be played.
• Depending on the contents and the connected equipment,
playback may not be possible.
*1: “ _ ” stands for a digit that is unique to each set.
*2: The name that is displayed for this system can be
changed from the “Edit STEREO SYSTEM name”
settings. (
>
9, “Advanced network settings”)
Bluetooth
®
operations
By using the Bluetooth
®
connection, you can listen to the sound from
the Bluetooth
®
audio device from this system wirelessly.
Refer to the operating instructions of the Bluetooth
®
device for details.
Preparation
• Turn on the Bluetooth
®
feature of the device and place the
device near this system.
• If this system is already connected to a Bluetooth
®
device,
disconnect it.
1
Press [SELECTOR] repeatedly to select “BLUETOOTH”.
If “Pairing” is indicated on the display, go to step 3.
2 Press [PLAY MENU] to select “New Device” and then
press [OK].
“Pairing” is indicated on the display.
3 Select “SC-PMX9” from the Bluetooth
®
device’s
Bluetooth
®
menu.
4 Start play on the Bluetooth
®
device.
Note:
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Preparation
• Turn on the Bluetooth
®
feature of the device and place the
device near the speakers.
• If this system is already connected to a Bluetooth
®
device,
disconnect it.
1 Press [SELECTOR] repeatedly to select
“BLUETOOTH”.
“Ready” is indicated on the display.
2 Select “SC-PMX9” from the Bluetooth
®
device’s
Bluetooth
®
menu.
The name of the connected device is indicated on
the display for 2 seconds.
3 Start play on the Bluetooth
®
device.
Note:
• This system can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this system will
automatically try and connect to the last connected Bluetooth
®
device.
• The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
(Continued on the next page)
Display the password
Change the password
Audio codec Example of file extension
MP3 .mp3
WAV .wav
FLAC .flac
Pairing Bluetooth
®
devices
Connecting a paired Bluetooth
®
device
SC-PMX9PP-VQT5J68_mst.book 11 ページ ２０１４年３月４日 火曜日 午前１１時１３分