Filter
Top Products
Timers and others
21
RQT7360
Using the timers
To cancel the timer
Press [˚PLAY/REC] to clear the timer indicators from the
display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when unit is on)
• To change the play/record times
Do steps 1, 2, 3, and 5 on the previous page.
• To change the source or volume
Press [
˚˚
˚˚
˚PLAY/REC] to clear the timer indicator from the
display.
Make changes to the source or volume.
Do steps 4 to 5 on the previous page.
A Using the play/record timer
To check the settings (when unit is off)
Press [CLOCK/TIMER] twice.
(When the unit is on, press [CLOCK/TIMER] to select “˚PLAY”
or “˚REC”.)
Every time you press the button:
CLOCK
REC
PLAY
The timer conditions are shown in the following order:
Play timer: start time → finish time → source → volume
Record timer: start time → finish time → source
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer’s start time.
Note
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in the
standby mode.
B Using the sleep timer
Set the unit to stop and turn off after the certain time.
While enjoying the desired source:
Press [SLEEP, –AUTO OFF] to select the desired
time.
Every time you press the button:
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120
SLEEP OFF
Note
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
C
L
OC
K/
TIMER
CLOCK/
TIMER
S
LEE
P
–
A
U
T
O
O
FF
SLEEP
–AUTO OFF
To
cancel the sleep
timer
confirm the
remaining time
change the time
remaining during
operation
Action
Press [SLEEP] to select “SLEEP
OFF”.
Press [SLEEP].
Press [SLEEP] to show the remaining
time, and then press [SLEEP] to
select the desired time.
RQT7360-B_19-21_EN 30/12/03, 2:50 pm21