Filter
Top Products
10
RQT7360
Listening operations
2
4
1
3
//
REW
,
//
FF
Disc tray
Label must face upward.
1
2
OPEN/
CLOSE
3
CD
3
/
8
4
a
b
c
CDs
This unit can play CD-DA (digital audio) format audio CD-R
and CD-RW that have been finalized (a process performed af-
ter recording that enables this unit to play audio CD-R and CD-
RW).
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
1 Press [
yy
yy
y/I] to turn the unit on.
2 Press [0 OPEN/CLOSE] to load a CD, then press
[0 OPEN/CLOSE] again.
3 Press [CD 3/8] to start play.
4 Adjust the volume.
Note
• During random play, you cannot skip to tracks which have already
been played.
• During program play (\ page 12), or random play, search can be
done within the track in play only.
• During program play, skipping is always in the programmed order,
whether forward or backward.
• Program play cannot be used in combination with random play.
A CD selection and care
With this system, you can only play CDs having this mark. ( )
Do not;
• use irregularly shaped CDs. ( )
• attach extra labels and stickers.
• use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. ( )
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printer available on the market.
To
stop the disc
pause play
skip tracks
search through
tracks
start one touch play
remove a CD
Action
Press [STOP 7].
Press [CD 3/8]. Press again to
resume play.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢].
Press and hold [
44
44
4/REW/4] or [
33
33
3/
FF/¢] during play or pause.
Press [CD 3/8] when the CD is
loaded but the unit is off.
Press [0 OPEN/CLOSE].
RQT7360-B_08-12_EN 30/12/03, 2:48 pm10