Filter
Top Products
9
RQT9861
Note:
The default setting is underlined. Changed settings will
be kept until it is changed again, unless otherwise
indicated.
Audio format
You can view the current audio format.
Press and hold [SOUND] for a minimum of
4 seconds.
Setup Menu
1 Press [SETUP] repeatedly to select the setup
item.
2 Press [R, T] repeatedly to select the desired
setting and then press [OK].
Note:
The default setting is underlined. Changed settings will
be kept until it is changed again, unless otherwise
indicated.
3D CLR
DIALOG
The 3D Clear Mode Dialog feature
creates a sound field similar to the
sound coming from a TV screen and
makes dialogues clearer.
ON
: 3D Surround, Clear Mode Dialog
and Dolby Virtual Speaker effect
OFF: Dolby Virtual Speaker effect
The setting is set back to “ON” every
time you switch on the system.
DUAL AUDIO Sets the preferred audio channel
mode when there are two audio
modes received by the unit.
M1
: Main
M2: Secondary
M1 + M2: Main + secondary
This effect only works if the audio
output of the TV or player is set to
“Bitstream” and “Dolby Dual Mono” is
available in the sound source.
AGC Auto gain control prevents sudden
loud sound by reducing the sound
level automatically when the input is
too high.
ON
OFF
LOW VOL
MODE
Enhance the dialog in low volume
condition.
ON
OFF
Select “OFF” to cancel this effect if the
dialog does not sound natural in low
volume condition.
DOLBY
DIGITAL
Dolby Digital is the audio source.
DTS DTS is the audio source.
PCM MULTI Linear pulse-code modulation is the
audio source.
PCM 2 channel pulse-code modulation is
the audio source.
ANALOG Analog is the audio source.
SBC Sub-band Coding is the audio source.
(Bluetooth
®
mode only)
DIMMER Dims the display panel after
5 seconds of inactivity.
ON
OFF
AUTO POWER
DOWN
The system automatically switches off
if there is no audio input and when you
do not use it for 2 hours.
ON
OFF
VOL
LIMITATION
Sets the volume limit to 50 when you
switch on the system although the
volume is set to above 50 before it is
switched off.
ON
OFF
BLUETOOTH
STANDBY
This function allows you to connect a
paired Bluetooth
®
device when this
system is in standby mode.
ON
OFF
The system will switch on
automatically when you connect a
paired Bluetooth
®
device.
LINK MODE Change the Bluetooth
®
connection
link mode to suit the connection type.
Make sure to disconnect the current
connected device (“BLUETOOTH
READY” is shown).
MODE 1: Emphasis on connectivity.
MODE 2
: Emphasis on sound quality.
VIERA LINK Switch on the VIERA Link function.
ON
OFF
Select “OFF” when your HDAVI
Control device does not work correctly
with this system. ARC will be disabled.
Connect an optical digital audio cable.
Switch off all connected devices and
then switch them on again after
changing the setting.