Filter
Top Products
14
SQT0852
Choose a placement method that suits you best.
When placing the main unit in a rack or
on a table
≥ Place the main unit on a flat and
horizontal surface.
When attaching the main unit to a wall
≥ Place the main unit on a flat and vertical
surface.
∫ When placing the main unit in front
of the TV
The main unit may block or interfere with the
TV’s various sensors (C.A.T.S. (Contrast
Automatic Tracking System) sensor, remote
control sensor, etc.) and the 3D Eyewear
transmitters on a 3D compatible TV.
≥ If interference occurs, move the main unit
further away from the TV. If the TV still does
not function correctly, try using it in a rack or in
the wall mount position.
∫ If the TV’s remote control sensor is
blocked by the main unit
Try using the TV’s remote control from a
different angle. If the problem persists, you can
use the supplied IR Blaster to relay the signal to
the TV. (> 11)
Selecting the placement
method
Page 15
Page 16
≥ Place the active subwoofer within a few meters of the
main unit and in a horizontal position with the top
panel facing upward.
≥ Do not use the main unit or the active subwoofer in a
metal cabinet.
≥ Placing the active subwoofer too close to the walls
and corners can result in excessive bass. Cover walls
and windows with thick curtains.
≥ If irregular colouring occurs on your TV, turn the TV
off for about 30 minutes. If it persists, move the main
unit and active subwoofer further away from the TV.
≥ Keep magnetised items away. Magnetised cards,
watches, etc., can be damaged if placed too close to
the main unit and active subwoofer.
SC-HTB690-SQT0852.book 14 ページ ２０１５年１月３０日 金曜日 午後２時２分