Panasonic SC-HTB550 Speaker User Manual


 
Getting started
RQT9660
15
For a safety measure to prevent the speakers from falling, refer to page 17.
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers
horizontally” (> 10).
Attach the support legs and speaker feet.
Use the “Panasonic” logo to identify the top and bottom of the speaker.
Keep the screws and the speaker feet out of reach of children to prevent swallowing.
Place the speakers using the support legs and
speaker feet
2 Speakers 2 Speaker cables
(L): WHITE
(R): RED
1 Speaker joint
6 Screws 2 Support legs 2 Speaker feet
A Screw (supplied)
B Screw hole
C Speaker foot (supplied)
Attach the speaker foot directly below the wall mounting hole (as illustrated).
Align the
projecting parts
on the speaker
with support leg.
SC-HTB550_RQT9660_mst.book Page 15 Tuesday, December 20, 2011 1:55 PM