Panasonic SC-HTB550 Speaker User Manual


 
Getting started
RQT9660
11
Connect the speaker cables.
Use the “Panasonic” logo to identify the left and right speakers, then connect the cables (as illustrated).
Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw into the wall.
Use the measurements indicated below to identify the screwing positions on the wall.
Leave at least 20 mm (
25
/32q) of space above and on each side of the speaker to allow enough space for fitting the
speaker.
The position on the wall where the screw is to be attached, as well as the screw, should be capable of supporting over
33 kg (72.8 lbs).
Keep the screws out of reach of children to prevent swallowing.
1 Insert the wire
fully.
r: White
s: Blue line
2 Press into the
groove.
A RED: Right speaker channel (R)
B WHITE: Left speaker channel (L)
C At least 30 mm (1
3
/16q)
D 4.0 mm (
5
/32q)
E 7.0 mm to 9.4 mm (
9
/32q to
3
/8q)
F Wall or pillar
G 5.5 mm to 6.5 mm (
7
/32q to
1
/4q)
H 326 mm (12
27
/32q) I 316 mm (12
7
/16q) J 316 mm (12
7
/16q) K 26 mm (1
1
/16q)
L Wall mounting hole
White
Red
Push

Front view (semi-transparent image)
SC-HTB550_RQT9660_mst.book Page 11 Tuesday, December 20, 2011 1:55 PM