Filter
Top Products
21
RQT7696
Changing the player settings
∫ “Audio” tab
∫“Display” tab
∫ “Others” tab
(Effective when playing multi-channel audio)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position. If you have to place the center or surround
speakers closer to the seating position, adjust the delay time to
make up for the difference.
1 Press [34] to select the delay time box and press [ENTER].
2 Press [34] to adjust the delay time and press [ENTER].
If either distance a or b is
less than c, find the difference
in the relevant table and
change to the recommended
setting.
a Center speaker
b Surround speaker
To finish the speaker setting
Press [2] to select “Exit” and press [ENTER].
When you change the surround speaker setting for Dolby Digital, the
setting also changes for Dolby Pro Logic II.
e.g., the settings for MUSIC and PANORAMA are the same as those
for Dolby Digital.
Dynamic Range Compression
≥Off
≥On: Adjust for clarity even when the volume is low through compressing the range of the lowest
sound level and the highest sound level. Convenient for late night viewing. (Only works with
Dolby Digital)
Audio during Search
≥On
≥Off
Speaker Setting (‹ below)
Set the delay time for your center and
surround speakers.
≥Center: 0.0
/1.0/2.0/3.0/4.0/5.0 ms
≥Surround (L/R): 0.0
/5.0/10.0/15.0 ms
Menu Language
≥English ≥Français ≥Español
On-Screen Messages
≥On ≥Off
FL Dimmer
≥Bright ≥Dim
≥