Panasonic SC-HT880 Speaker System User Manual


 
4
RQT7978
Simple setup
Preparation
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
For assembly, use a Phillips-head screwdriver.
Make sure you have all the indicated components before starting assembly, setup, and connection.
There is no difference between the right and left speakers and pipes.
[Note]
To prevent the speaker cables from being pulled out of the pipes, leave the plastic wrap on the pipes while assembling the speaker stands.
[HT880]
[The\U nited\Kingdom,\A ustralia[and\N.Z.\
The front and surround speaker pairs as well as the pipe pairs are different.
–Check the label on the rear of the speaker before attaching the pipe (page 6).
–The pipe with the shorter cable is for the front speaker.
[HT840]
[HT880]
1 Assemble the speaker stands.
1 Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then pull
the rest of the cable through the base.
2 Insert the pipe.
3 Secure the pipe to the base.
Ensure the screws are securely fastened.
STEP1
The supplied stands are specially designed for
attachment to Panasonic SB-FS840 front speakers,
SB-FS842 front speakers, SB-FS930 front
speakers, SB-FS880 surround speakers, or SB-
FS881 front or surround speakers. Use only as
indicated in this setup.
Speaker assembly
[HT840] Front speakers
[HT880] Front and surround speakers
2 Front speakers 2 Bases2 Pipes 4 Short screws4 Long screws
[The\Un i ted\Kingdom,\Australia[and\N.Z.\
2 Front and 2 Surround speakers
4 Bases
8 Long screws
8 Short screws
[Others]
4 Front/Surround speakers
Pipes
2kpipes with short cable:
For front speakers
2kpipes with long cable:
For surround speakers
Cable
Base
Leave the excess speaker
cable for connecting later.
Plastic wrap
Insert the pipe while gently
pulling on the speaker cable.
Match these holes when you
insert the pipe.
Pipe support
Pipe
Base
Short screws
Phillips-head screwdriver
(not included)
Before proceeding to the next step, please remove the plastic
wrap from the pipe.
Speaker assembly
7978en-p03-27.fm Page 4 Monday, December 27, 2004 11:00 AM