Filter
Top Products
RQT8779
26
Using the AM/FM Radio
Using the AM/FM Radio
Up to 15 stations can be set in each band, FM and AM.
When a stereo FM broadcast is being received, “ST” lights in the
display.
∫ If noise is excessive
When “FM” is selected
Press and hold [—FM MODE] on the main unit to
display “MONO”.
Press and hold [—FM MODE] again to cancel the mode.
≥The mode is also canceled when you change the frequency.
When “AM” is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2()BP 1
∫ Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
Press [ENTER]
§3
.
2 While the frequency and “PGM” are flashing on the display
Press the numbered buttons to select a channel.
≥When selecting a 2-digit number
e.g. To select “12”, press [S10] ➜ [1] ➜ [2].
Alternatively, press [X, W], and then press [ENTER]
§3
.
The station occupying a channel is erased if another station is
preset to that channel.
Presetting stations automatically
1
Press [TUNER/BAND]
§1
to select “FM” or “AM”.
2
Press [6, 5]
§2
to tune to the lowest frequency
(FM: 87.9 or 87.5, AM: 520).
≥When performing this step on the main unit, first press
[-TUNE MODE] to select “MANUAL”, and then press [
X
TUNING
W
]
to tune to the lowest frequency (FM: 87.9 or 87.5, AM: 520).
3
Press and hold [ENTER]
§3
.
Release the button when “FM AUTO” or “AM AUTO” is displayed.
The tuner presets all the stations it can receive into the channels in
ascending order.
≥“SET OK” is displayed when the stations are set, and the radio
tunes to the last preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful.
Preset the channels manually (➜ right).
MEMORY SELECTOR
TUNING
-TUNE MODE
/
-
FM MODE
ENTER
FUNCTIONS
TUNER/BAND
,
Numbered
buttons
Radio operations are described mainly with the remote control.
You can alternatively use the corresponding button on the main unit.
§1
[SELECTOR]
§2
[X TUNING W]
§3
[MEMORY]
Selecting the preset channels
1
Press [TUNER/BAND]
§1
to select “FM” or “AM”.
2
Press the numbered buttons to select the channel.
≥When selecting a 2-digit number
e.g. To select “12”, press [S10] ➜ [1] ➜ [2].
Alternatively, press [X, W] to select the channel.
≥To perform this step on the main unit, first press [-TUNE MODE] to
select “PRESET”, and then press [X TUNING W] to select the
channel.
Manual tuning
1
Press [TUNER/BAND]
§1
to select “FM” or “AM”.
2
Press [6, 5]
§2
to select the frequency.
≥When performing this step on the main unit, first press
[-TUNE MODE] to select “MANUAL”, and then press [
X
TUNING
W
]
to select the frequency.
≥To start automatic tuning, press and hold [6, 5]
§2
until the
frequency starts scrolling. Tuning stops when a station is found.
DISC SFC
TG
D.MIX
MONO
SLP
ST
CT
MODE
AC
PRG
RDS
DTS
PL
A
PS
PTY
H.BASS
2
SRD
PGM
HDCD
E.
1
RND
CD
DVD
W
D
ST
MODE
AC
PRG
RDS
DTS
PL
A
PS
P
TY
H.BASS
SRD
PGM
HDCD
E.
1
CD
D
VD
W
D
MONO
ST
MODE
AC
PRG
RDS
DTS
PL
A
PS
PTY
H.BASS
SRD
PGM
HDCD
E.
1
CD
DVD
W
D
DISC SFC
TG
D.MIX
MONO
SLP
ST
CT
MODE
AC
PRG
RDS
DTS
PL
A
PS
PTY
H.BASS
2
SRD
PGM
HDCD
E.
1
RND
CD
DVD
W
D