Panasonic SC-HT440 Home Theater System User Manual


 
RQT8593
24
Using the radio
Using the radio
Up to 15 stations can be set in each band, FM and AM.
When a stereo FM broadcast is being received,
“ST” lights in the display.
If noise is excessive
When “FM” is selected
Press and hold [—FM MODE] on the main unit to
display “MONO”.
Press and hold [—FM MODE] again to cancel the mode.
The mode is also canceled when you change the frequency.
When “AM” is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2()BP 1
Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
Press [ENTER].
2 While the frequency and “PGM” are flashing on the display
Press the numbered buttons to select a channel.
To select a 2-digit number
e.g. To select 12:
[S10] [1] [2]
Alternatively, press [X, W], and then press [ENTER].
The station occupying a channel is erased if another station is
preset to that channel.
Presetting stations automatically
1
Press [SELECTOR] to select “FM” or “AM”.
2
Press [-TUNE MODE] to select “MANUAL”.
Each time you press the button: MANUAL()PRESET
3
Press [X TUNING W] to tune to the lowest frequency
(FM: 87.9 or 87.5, AM: 520).
4
Press and hold [MEMORY].
Release the button when “FM AUTO” or “AM AUTO” is displayed.
The tuner presets all the stations it can receive into the channels in
ascending order.
“SET OK” is displayed when the stations are set, and the radio
tunes to the last preset station.
“ERROR” is displayed when automatic presetting is unsuccessful.
Preset the channels manually (right).
MEMORY SELECTOR
TUNING
-TUNE MODE
/
-
FM MODE
ENTER
FUNCTIONS
TUNER/BAND
Numbered
buttons
Main unit only
Selecting the preset channels
1
Press [TUNER/BAND] to select “FM” or “AM”.
2
Press the numbered buttons to select the channel.
To select a 2-digit number
e.g. 12: [S10] [1] [2]
Alternatively, press [X, W].
Manual tuning
1
Press [SELECTOR] to select “FM” or “AM”.
2
Press [-TUNE MODE] to select “MANUAL”.
3
Press [X TUNING W] to select the frequency.
To start automatic tuning, press and hold [X TUNING W] until the
frequency starts scrolling. Tuning stops when a station is found.
DISC SFC
TG
D.MIX
MONO
SLP
D
E
AC
P
RG
S
A
ST
H.BASS
SRD
PGM
HDCD
E.
1
W
MONO
ST
H.BASS
SRD
PGM
HDCD
E.
1
W
Main unit only
DISC SFC
TG
D.MIX
MONO
SLP
HT440En.book Page 24 Thursday, December 29, 2005 7:56 PM