Panasonic SC-HC35 Stereo System User Manual


 
7
RQTX1260
ENGLISH
2 Measure and mark the position of the wall
mount brackets (Both sides).
Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
3 Attach the wall mount bracket to the wall with 2
screws F. (Both sides)
Use a spirit level to ensure both wall mount brackets are level.
Use a screw which is strong enough to support the weight of at least
33 kg (72.8 lbs).
4 Fix the safety holder D onto the unit with the
safety holder screw B.
Before attaching, stick the rear pads (supplied) to A.
Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70 N0cm (0.5 lbf0ft).
5 Hang the unit on the wall.
Hook the unit securely onto the wall mount brackets.
Connect the FM/AM antenna and the AC power supply cord to the unit
before hanging the unit onto the wall. (> 5)
After hanging the unit, release your hand carefully to confirm the unit sits
securely on the wall.
6 Fix the safety holders E onto the wall mount
brackets with the safety holder screws C.
(Both sides)
Screw tightening torque: 80 N0cm (0.6 lbf0ft) to 120 N0cm (0.9 lbf0ft).
7 Drive the safety holder fixing screw G to
secure the safety holder D onto the wall.
Refer to step 3 for requirements before screwing.
229 mm (9
1
/32q)
12.5 mm (
1
/2q)
300 mm (11
13
/16q)
480 mm (19
q)
680 mm (30
23
/32q)
48.5 mm
(1
29
/32q)
229 mm (9
1
/32q)
133 mm
(5
1
/4q)
118 mm
(4
21
/32q)
89 mm (3
1
/2q)
139 mm
(5
15
/32q)
At least 30 mm (1
3
/16q)
7.5 mm (
19
/64q) to 9.4 mm (
3
/8q)
4 mm
(
5
/32q)
Wall mount bracket
Safety holder
screw B
Wall
Safety holder E
Safety holder
screw C
Safety holder fixing screw G
Safety holder D
Fixed to the wall
SC-HC55_35-RQTX1260.book 7 ページ 2011年4月4日 月曜日 午後4時50分