Filter
Top Products
RQTX1073
Preset EQ Press [PRESET EQ] repeatedly to select “HEAVY”, “SOFT”, “CLEAR”, “VOCAL” or “FLAT”.
Bass or Treble
Press [BASS/TREBLE] repeatedly to select “BASS” or “TREBLE”.
Press [e,r] to adjust the level (-4 to +4).
Surround Sound Press [SURROUND] repeatedly during play to select “ON SURROUND” or “OFF SURROUND”.
If interference in FM stereo reception increases, cancel the surround sound effect.
D.Bass Press [D.BASS] repeatedly during play to select “ON D.BASS” or “OFF D.BASS”.
Re-master Press [RE-MASTER] repeatedly during play to select “ON RE-MASTER” or “OFF RE-MASTER”.
Digital remaster is effective on MP3.
Analogue remaster is effective on iPod/iPhone and AUX.
•
•
The sleep timer can turn the unit off after a set time.
Press [SLEEP] to turn the sleep function on or off.
Press [SLEEP] once to check the remaining time.
The play timer and sleep timer can be used together. The sleep timer always has the priority. Be sure not to overlap the timer settings.
When AUTO OFF is ON and the unit is left unused for about 30 minutes, the unit will shut down even if the play time or sleep time has not expired.
•
•
You can set the timer to come on at a certain time to wake you up.
This unit offers 3 optional play timers.
Preparation:
Turn the unit on and set the clock (➡ above).
Prepare the music source (disc, radio, iPod/iPhone or AUX) and set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
Within 5 seconds, press [e,r] to set the starting time.
Press [OK].
To set the finishing time, repeat step and .
To activate the timer
Press [z, PLAY] repeatedly to turn the selected play timer on.
Press [^] to turn the unit off.
•
•
This is a 24-hour clock.
Press [CLOCK/TIMER] to select “CLOCK”.
Within 5 seconds, press [e,r] to set the time. (Press and hold to change the time faster.)
Press [OK].
To display the clock, press [CLOCK/TIMER].
Reset the clock regularly to maintain accuracy.
•
•
Setting the clock
Play timer
Change the settings
Repeat step to (➡ above).
Change the source or volume
Press [z, PLAY] twice to clear zPLAY indicator from the display.
Make changes to the source or volume.
Perform step and (➡ above).
Check the settings (When the
unit is on or in standby mode)
Press [CLOCK/TIMER] repeatedly to select “zPLAY 1”, “zPLAY 2” or “zPLAY 3”.
Cancel
Press [z, PLAY] twice to clear the timer indicator from the display.
The timer will start at the preset time, with the volume increasing gradually to the preset level.•
Sleep timer
30MIN 60MIN 90MIN 120MIN
OFF (Cancelled)
Timer
Sound adjustment
11