Panasonic SC-BTT465 Home Theater System User Manual


 
13
Getting started
VQT5F60
Settings
The following settings can be performed anytime
in the Setup menu. (> 29, 30)
After connecting your new home theater for the
first time and pressing [Í], the basic settings
screen will appear.
Preparation
Turn on the TV and select the appropriate
video input.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to
continue with the settings.
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Select “Wired” or “Wireless” and press [OK].
Follow the on-screen instructions to establish
your connection settings.
If “Wireless LAN Adaptor is not connected.” is
displayed, check that the Wireless LAN Adaptor
is fully inserted. Alternatively, disconnect and
reconnect it.
About the wireless connection
To obtain your network name (SSID*) and
encryption key (password).
The default settings may be
printed on the router. If the SSID
and password have been
changed, consult the person
responsible for setting up your
network.
For more details, refer to the
manual supplied with the wireless broadband
router, or contact your Internet provider.
For more information or assistance, refer to
http://www.panasonic.com/support
If your SSID is not displayed;
Search again by pressing the red button on the
remote control.
Stealth SSIDs will not be displayed; in this case,
enter manually in the following order.
1 To display the SSID input screen :
While displaying the HOME menu, press the
[SETTINGS] button on the remote control
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
2 Enter your SSID.
If your wireless network is encrypted, go to
page 14.
If your wireless router supports WPS (Wi-Fi
Protected Setup
TM
);
You can easily set up a connection by pressing
the green button on the remote control.
Easy Settings
Easy Network Setting
OK
RETURN
Easy Network Setting
Wired
Wireless
Select a connection mode.
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
e.g.
WPS (PUSH)
Wireless Settings
Reception
Select a wireless network for connection.
Press the green button to connect via
WPS (PUSH button method).
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Search again
OK
RETURN
OPTION
SC-BTT466&465&405P-VQT5F60_mst.book 13 ページ 2014年1月17日 金曜日 午後5時56分