Panasonic SC-BTT370 Home Theater System User Manual


 
Getting started
21
VQT3D27
Wireless Setting
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Internet Connection Check)
Refer to the operating instructions of the hub or router.
WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating
to the connection and security of wireless LAN devices. To see whether
your Wireless router supports WPS, check the Wireless router operating
instructions.
You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. ( 40)
You can redo these settings individually using “Network Settings”. ( 40)
Do not use this unit to connect to any wireless network for which you do not
have usage rights.
During automatic searches in a wireless network environment, wireless
networks (SSID*) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router might change. When you have trouble getting
online on your PC, perform the network settings on your PC in accordance
with the settings of Wireless router.
Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
* An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID matches
for both devices.
If you have more than one Panasonic player/recorder and the
remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (40, “Remote Control Code”)
When you experience problems
with settings
Display Check the following
A conflict with another
device occurred.
Please wait a few moments, and
then try again.
A time out error
occurred.
Setting of the Wireless router for
MAC Address etc.
The signal may be weak.
The SSID (right) and the
encryption key of the Wireless
router.
Please wait a few moments, and
then try again.
An authentication
error or a time out
error occurred.
A device error
occurred.
Contact our Customer Service
Center or your nearest dealer.
Display
Check the
following
1. LAN cable connection or
Wireless setting
:Fail
Connection of
the LAN
cables (17)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or
Wireless setting
:Pass Connection
and settings of
the hub and
router
Settings of “IP
Address /
DNS Settings”
(40)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or
Wireless setting
:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
OK
Wireless Settings
Failed to complete.
A conflict with another device occurred.
Do you want to configure wireless network connection
setting again ?
Yes No
OK
Network Easy Setting (Home Network Connection Check)
Yes No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
: Fail
: Fail
: Fail
Display Check the following
Cannot find the server.
(Error code: B019)
“Primary DNS” and “Secondary
DNS” Settings of “IP Address /
DNS Settings” ( 40)
Failed to connect to the
server.
(Error code: B020)
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
Settings of “Proxy Server
Settings” (40) and the router.
Reprogramming the remote
control
OK
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet : Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
SC-BTT770_370_270P_eng.book 21 ページ 2010年12月16日 木曜日 午後9時51分