Panasonic SC-BTT370 Home Theater System User Manual


 
16
VQT3D27
[BTT770] [BTT370] When the connecting devices have an HDMI terminal
A HDMI cable (not supplied)
B Set Top Box (Cable/Satellite), etc.
C Other devices (Video game, etc.)
Make sure that the HDMI cable connection is made to enjoy
the videos from the Set Top Box, etc. Futhermore, select
“HDMI Input1” or “HDMI Input2” as a source.
HDMI Standby Pass-Through ( 39)
Even if this unit is in standby mode, a device connected with
this unit can output videos and sound to the TV.
Moreover, you can switch the HDMI input terminal by pressing
[EXT-IN] on the remote control.
Sound will not be output from this unit's speakers.
When the connecting devices do not have an HDMI terminal
A Refer to the operating instructions of the
respective devices for the optimal connections.
B Optical digital audio cable (not supplied)
C Set Top Box (Cable/Satellite), etc.
Connection with Set Top Box, etc.
AV IN
(ARC)
AV OUT
AV OUT
HDMI IN 2
HDMI IN 1(CABLE/SAT)
HDMI AV OUT
(ARC)
TV
e.g.,
OPTICAL
OUT
OPTICAL
TV
e.g.,
To enjoy TV audio from this home theater
system’s speakers:
1 Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
2 Select “DIGITAL IN” or “D-IN” as a source
( 23).
Radio antenna connection
Using an indoor antenna Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
A FM indoor antenna (supplied)
B Adhesive tape
Affix this end of the antenna where reception is best.
A FM outdoor antenna [Using a TV antenna (not
supplied)]
The antenna should be installed by a competent
technician.
B 75 coaxial cable (not supplied)
C Antenna plug (not supplied)
FM ANT
75
Ω
Main unit
FM ANT
75
Ω
e.g.,
Main unit
SC-BTT770_370_270P_eng.book 16 ページ 2010年12月16日 木曜日 午後9時51分