Filter
Top Products
32
VQT4D57
∫ HDMI Output
Press [OK] to show the following settings:
¾HDMI Video Format
The items supported by the connected devices are
indicated on the screen as “
¢
”. When any item
without “
¢
” is selected, the images may be distorted.
≥ If “Automatic” is selected, the best suited
output resolution to the connected television
is automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting 1080/
24p output using an HDMI cable, movies and other
material recorded at 24p are output at 24p.
≥
When playing DVD-Video, set to “On” and then
set “24p” in “Picture Settings” (
>
29) to “On”.
≥ When BD-Video images other than 24p are
played, images are output at 60p.
≥ 24p: A progressive image recorded at a rate
of 24 frames per second (motion-picture film).
Many BD-Video movie contents are recorded
in 24 frames/second in accordance with the
film materials.
¾HDMI Colour Mode
This setting is for selecting colour-space
conversion of the image signal when the unit is
connected using an HDMI cable.
¾Deep Colour Output
This setting is for selecting whether to use Deep
Colour output when a television that supports
Deep Colour is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
∫ Still Mode
Select the type of picture shown when you pause
playback.
∫ Seamless Play
The chapter segments in playlists are played
seamlessly.
≥ Select “On”, when the picture freezes for a
moment at the chapters segment in playlists.
∫ Surround Effects (> 30)
∫ Sound Effects (> 30)
∫ Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Automatic” is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
¾MPEG Audio
Select the audio signal to output.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format. This
unit decodes the audio format and transmits to
the connected equipment.
≥
Not making the proper settings may result in noise.
Automatic
Automatically selects the type
of picture shown.
Field
Select if jittering occurs when
“Automatic” is selected.
Frame
Select if small text or fine
patterns cannot be seen clearly
when “Automatic” is selected.
Sound
SC-BTT190GNGSGA-VQT4D57_mst.book 32 ページ ２０１２年１月１２日 木曜日 午前９時５９分