Panasonic SC-BT303 Home Theater System User Manual


 
40
RQT9508
Changing the unit’s settings
To select these settings, perform steps 1 to 5 (> 37)
“Network”
IP Address/DNS Settings (> 33)
Press [OK] to show the following settings.
Connection Test — — — —
IP Address Auto Configuration ( DHCP ) On
Off
IP Address — — —. — — —. — — —. — — —
Subnet Mask — — —. — — —. — — —. — — —
Default Gateway — — —. — — —. — — —. — — —
DNS Auto Configuration ( DHCP ) On
Off
Primary DNS — — —. — — —. — — —. — — —
Secondary DNS — — —. — — —. — — —. — — —
Auto Detect Connection Speed On
Off
Connection Speed Setting
This is enabled only when “Auto Detect Connection Speed” is
turned “Off”.
10BASE Half Duplex
10BASE Full Duplex
100BASE Half Duplex 100BASE Full Duplex
Proxy Server Settings (> 34)
Press [OK] to show the following settings.
Reset to factory preset Yes No
Proxy Address (The initial setting is blank.)
Proxy Port Number (The initial setting is “0”.)
Connection Test — — — —
Network Service (VIERA CAST) (> 32)
Press [OK] to show the following settings.
Network Lock
You can restrict using VIERA CAST.
Follow the on-screen instructions. Enter a 4-digit password with
the numbered buttons when the password screen is shown. It
will be the common password for “DVD-Video Ratings”,
“BD-Video Ratings” and “Network Lock”.
Do not forget your password.
On Off
Changing settings (When “On” is selected)
Change Password
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted
automatically to the standard volume while using the VIERA
CAST.
Depending on contents, this function effect will not work.
Select “Off” when the audio is warped.
This function has no effect when Dolby PL II is activated. (
>
18)
On Off
Reduce to Screen Size
The screen is displayed reduced so the displayed screen of the
VIERA CAST does not get truncated.
On Off
Time Zone
By selecting the time zone, it is possible to set the unit’s time to
match your location.
Some VIERA CAST contents require the time zone to be set.
Set the time zone if necessary.
GMT s12 to r12
(The initial setting is “s5”.)
GMT s5
l
EST (Eastern Standard Time)
GMT s6 l CST (Central Standard Time)
GMT s7
l
MST
(Mountain Standard Time)
GMT s8 l PST (Pacific Standard Time)
GMT s9 l AKST (Alaska Standard Time)
GMT s10 l HST (Hawaii Standard Time)
DST
Select “On” when using Daylight Saving time.
On Off
MAC Address (> 33)
Displays the “MAC Address” of this unit.
“Others”
Off Timer
Select how long the unit remains on when it is not being used.
Effective only when “BD/DVD” or “SD” is selected as source.
2 Hours 6 Hours
Off
Remote Control Code (> 50) Set Code 1
Set Code 2
Restore Default Settings
This returns all values in the Setup menu and the on-screen
menu, except for “Remote Control Code”, “On-screen Language”,
“IP Address/DNS Settings”, “Proxy Server Settings”, “Network
Service”, “DVD-Video Ratings” and “BD-Video Ratings” to the
default settings.
Yes No
Firmware Update (> 32)
Press [OK] to show the following settings.
Automatic Update Check
When this equipment remains connected to the Internet, it will
check for the latest firmware version when it is turned on and
you can update it if necessary.
On
Off
Update Now
You can update the firmware manually.
Yes No
Advanced operations
BT300.book 40 ページ 2009年6月12日 金曜日 午後12時13分