Getting started
7
VQT2T10
1 Standby/on switch (POWER Í/I) (> 15)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Power indicator
The indicator lights when this unit is turned on.
3 Connect iPod (> 26)
4 Adjust the volume of the main unit
5 Open or close the disc tray (> 16)
6Disc tray
7 SD card slot (> 16)
8 Display (FL Display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
≥ The display is turned off when the volume is adjusted to
“0”. (> 30)
9 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20
o
up and down, 30
o
left and right
10 Select the source (> 17)
11 Stop (> 19)
12 Start play (> 19)
∫ If the front cover comes off
1 Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
1 AC IN terminal (> 15)
2 Speaker terminals (> 12)
3 Cooling fan
4 HDMI AV OUT terminal (> 12, 13)
5 FM radio antenna terminal (> 14)
6 DIGITAL AUDIO IN terminals (> 12 , 13, 14)
Terminal 1 is designated for connection with the TV.
Terminal 2 can be used with equipment other than the
STB.
7 VIDEO OUT terminal (> 12, 13)
8 AUX terminal (> 13)
Main unit (Front)
OPEN/CLOSEVOLUME
POWER
iPod
SELECTOR
SD CARD
1 2
3
45
6 7 8 9 10 11 12
Pull open.
Main unit (Rear)
AC IN
5
2
1
3Ω6Ω6Ω
FRONT
CENTER
SUBWOOFER
R L
2
1
3Ω
SURROUND
R L
-
AV
OUT
VIDEO
OUT
AUX
OPTICAL
21
DIGITAL AUDIO IN
+
6
FM ANT
75
()
Ω
L
R
AC IN
5
2
1
3Ω6Ω6Ω
FRONT
CENTER
SUBWOOFER
R L
4
3
3Ω
SURROUND
R L
-
AV
OUT
(ARC)
VIDEO
OUT
AUX
OPTICAL
21
DIGITAL AUDIO IN
+
6
L
R
FM ANT
75
()
Ω
1 2 3 4 5 6
7 8
Saving energy
This unit is designed to conserve its power consumption and save energy.
≥ This unit will automatically turn to standby mode after 30 minutes if it is inactive.
SC-BT228P_VQT2T10_eng.book 7 ページ 2009年12月6日 日曜日 午後4時37分