Panasonic SC-BT228 Home Theater System User Manual


 
TV
25
VQT2T10
You can turn on this unit and the TV, and start play with a
single press of a button.
While the unit and the TV are in standby mode;
Press [1 PLAY].
You can select whether audio is output from the unit’s
speakers or the TV speakers by using the TV menu settings.
Home theater
This unit’s speakers are active.
When this unit is in standby mode, changing the TV
speakers to this unit’s speakers in the TV menu will
automatically turn the unit on and select “AUX”
*1
, “ARC”
*1
or
“D-IN 1” (DIGITAL IN 1)
*1
as the source.
You can control the volume setting using the volume or mute
button on the TV’s remote control.
If you turn off this unit, TV speakers will be automatically
activated.
TV
TV speakers are active.
The volume of this unit is set to “0”.
Audio output is 2-channel audio.
When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the TV is off, the TV will
automatically turn on.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
(e.g., Direct Navigator screen)
When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”
*1
, “ARC”
*1
or “D-IN 1” (DIGITAL
IN 1)
*1
or “D-IN 2” (DIGITAL IN 2)
*2
.
This function does not work when the iPod selector is
chosen. (> 26)
Delay between audio and video is automatically adjusted,
enabling you to enjoy smooth audio for the picture (> 30,
“Audio Delay”).
This function works only when “BD/DVD”, “SD”, “AUX”
*1
,
“ARC”
*1
, “D-IN 1” (DIGITAL IN 1)
*1
or “D-IN 2”
(DIGITAL IN 2)
*2
is selected as the source on this unit.
*1 “AUX”, “ARC” or “D-IN 1” works depending on the setting
in “Setting the audio link with the TV”.
*2 “D-IN 2” works depending on the setting in “Setting the
audio link with the STB”.
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later.)
Select “Video” in “Power Off Link” (> 31)
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
This works only during “BD/DVD” or “SD” playback and
resume modes.
1 Press [SUB MENU].
2 Select an item and
press [OK].
You cannot use the sub menu
while the Top Menu for BD-Video
or DVD-Video is displayed.
The buttons that you can use for this unit vary depending on the TV. For
details, refer to the operating instructions of the TV.
The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
One touch play
Speaker control
Automatic input switching
(Power on link)
Automatic lip-sync function
(for HDAVI Control 3 or later)
Power off link
Easy control only with VIERA
remote control
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENU
OK
RETURN
VQT2T10~Body_mst.fm 25 ページ 2009年12月22日 火曜日 午後2時45分