Filter
Top Products
5
RQT7923
Step 2Step 2
- Inserting batteries into the remote control - Inserting batteries into the remote control
!!2,2
■ Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
• Do not use rechargeable type batteries.
• Mishandling of batteries can cause electrolyte leakage which can damage
items the fl uid contacts and may cause a fi re.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to fl ame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
■ Use
• Aim at the remote control sensor, avoiding obstacles, at a maximum range
of 7m (23 feet) directly in front of the unit
Refer to page 6 for the remote control sensor position.
SStep tep 33
- - DEMO functionDEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be shown
on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [STOP 7, –DEMO].
The display change each time the button is held down.
DEMO OFF DEMO ON
While in standby mode, select “DEMO OFF” to reduce power consumption.
Placement of speakersPlacement of speakers
SC-PM31 is used in the illustrations unless otherwise mentioned.
Speakers are designed identically so that no left or right channel orientation is necessary.
• These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices
easily infl uenced by magnetism.
• To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.
Note
• Keep your speakers at least 10mm (
13
/
32
”)away from the system for proper ventilation.
Use only the supplied speakers.
• The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Caution
• Use the speakers only with the recommended system.
Failure to do so can damage the amplifi er and speakers, and can cause fi re. Consult a qualifi ed service person
if damage occurs or if a sudden change in performance is apparent.
• Do not attach these speakers to walls or ceilings.
PM31_7923-3P.indd 5PM31_7923-3P.indd 5 2/18/05 3:25:02 PM2/18/05 3:25:02 PM